Differences

This shows you the differences between two versions of the page.

--- ph:start [2012/01/01 04:00] – Jeff Kennell
+++ ph:start [2018/05/28 22:29] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-=======Power House Plan & Design===
+====== Power House Plans & Design ======
-This page gives details of the Power House design, along with links to the construction notes and drawings. A builders guide is available in English.  The architectural drawings are available in either English (SAE) or Metric dimensioning.  The Electrical/Mechanical drawings contain several special components that must be made (exhaust pipes, louvers, etc) as well as installation prints for the internal components (control system, etc).
-The Power House design is provided in Autocad or PDF format, in Either English (SAE) or Metric Dimensions.   There are three major "sections" to the plans.
+The Power House design is provided in Autocad or PDF format, in both English (SAE) or Metric Dimensions.  A builders guide is available in English.  The drawings contain several special components that must be manufactured (exhaust pipes, louvers, etc) as well as installation prints for the internal components (control system, etc).
-  - Architectural Construction Drawings:   These cover the building construction itself, from footer to roof.  A Builders Guide is provided to   assist in the construction.
+==
-  - Electrical/Mechanical Installation Drawings:  These detail the installation of the major interior components; fuel piping, electrical controls, lights, etc.
+  - **Architectural Construction Drawings**:   These cover the building construction itself, from footer to roof.  A Builders Guide is provided to assist in the construction.
-  - Metal Parts Drawings:  These are parts that must be specially made for use in the installation (2) above.   See note below.
+  - **Electrical/Mechanical Installation Drawings**:  These detail the installation of the major interior components; fuel piping, electrical controls, lights, etc.
+  - **Metal Fabrication Parts Drawings**:  These are parts that must be specially made for use in the installation (2) above.   See note below.
+{{ :ph:ph-overview.jpg?400|}}
-  * {{:pch:builders-guide.pdf|Builders Guide: English Language}}
+  * {{:ph:builders-guide.pdf|Builders Guide: English Language Pdf Format}}
+  * {{:ph:builders-guide.doc|Builders Guide: English Language MS-Word Source File}}
-==**English (SAE) Dimensions**==
+==English (SAE) Dimensions==
   * Architectural Construction Drawings: English Dimensions
     * [[:ph:eng-arch-pdf:start|pdf]]
@@ Line 19: / Line 21: @@
     * [[:ph:eng-parts:start|All]]
-==**Metric Dimensions**==
+==Metric Dimensions==
   * Architectural Construction Drawings: Metric Dimensions
     * [[:ph:mt-arch-pdf:start|pdf]]
@@ Line 29: / Line 31: @@
-There are several non-standard parts that must be manufactured.  The drawings under Metal Fabrication Parts are also listed by drawing number below.
+===Parts to be manufactured===
-  - P33 Exhaust Air Ducts (May be provided by the generator supply company)
-  - P34 Exhaust Pipes
-  - P35 Electrical Cabinet Support Frame (May be pre-made or manufactured on site)
-  - P37 Intake Air Louvers (All ready on order from previous supplier)
-  - P38 Master Ground Bus Bar
-  - P43 Fuel pipe brackets
-  - P44 Modify Fuel Pipe mounting blocks
+The drawings under Metal Fabrication Parts are also listed by drawing number below.
-\\
+  - **P33** Exhaust Air Ducts (May be provided by the generator supply company)
+  - **P34** Exhaust Pipes
+  - **P35** Electrical Cabinet Support Frame (May be pre-made or manufactured on site)
+  - **P37** Intake Air Louvers
+  - **P38** Master Ground Bus Bar
+  - **P43** Fuel pipe brackets
+  - **P44** Modify Fuel Pipe mounting blocks

MetaTek

User Tools

Site Tools

Differences

Page Tools